Issue |
MATEC Web Conf.
Volume 220, 2018
2018 The 2nd International Conference on Mechanical, System and Control Engineering (ICMSC 2018)
|
|
---|---|---|
Article Number | 04008 | |
Number of page(s) | 4 | |
Section | Mechanical Engineering and Measurement Technology | |
DOI | https://doi.org/10.1051/matecconf/201822004008 | |
Published online | 29 October 2018 |
Three-dimensional Finite Element Modelling of the Cylindrical Specimen Upsetting
Bauman Moscow State Technical University, 105005 Moscow, Russia
Friction has a substantial influence on the metal forming at upsetting of cylindrical aluminum specimens. The finite element method is often used to investigate this problem. This paper aims to reveal possible numerical errors and obstacles related to the 3D finite element solution of the problem. The calculation results for the proposed numerical 3D-model are compared with the experimental data. The influence of friction is demonstrated and a good agreement on the tool displacement is obtained. The features of the numerical solution of the problem in the ANSYS finite element software are shown.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.