| Issue |
MATEC Web Conf.
Volume 197, 2018
The 3rd Annual Applied Science and Engineering Conference (AASEC 2018)
|
|
|---|---|---|
| Article Number | 02009 | |
| Number of page(s) | 3 | |
| Section | Physics | |
| DOI | https://doi.org/10.1051/matecconf/201819702009 | |
| Published online | 12 September 2018 | |
The influence of Cu doped on structure and mechanical properties of aluminium material
1
Department of Physics, Faculty Mathematics and Natural Science. State University of Jakarta, Jakarta 13220
2
Department of Physics, Faculty Mathematics and Natural Science. University of Indonesia, Depok 16424
* Corresponding author: anggorobs1960@yahoo.com; erfan@unj.ac.id
Development of technology in industrial field specially automotive needs specific materials with good properties. Aluminum materials are as alternative to answer this challenge. Aluminum alloy that is being developed by Cu doped will be found the new material with good properties. In this report, we have synthesized AlCu alloy using hot mixing method. The composition of 95.1 to 96.2 wt % of Al and 3.8 to 4.9 wt% of Cu were synthesized by melting and mixing process at a temperature of 1100 °C. Analysis of the structure of x-ray diffraction data for Al-Cu showed a single phase of Al for all compositions. The mechanical properties such as hardness of highest vickers of alloy of 96.2% Al - 3.8% Cu is 80 kg/mm2 for cooling in room temperature.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.