MATEC Web Conf.
Volume 197, 2018The 3rd Annual Applied Science and Engineering Conference (AASEC 2018)
|Number of page(s)||5|
|Published online||12 September 2018|
Effects of sintering temperature on structure, magnetic and dielectric properties of La0.5Sr0.5Fe0.9Mn0.05Ti0.05O3 material
Universitas Negeri Jakarta, Dept. of Physics, Jalan Rawamangun Muka 13220, Jakarta, Indonesia
2 Syiah Kuala University, Dept. of Physics, Banda Aceh, Indonesia
3 Universitas Islam Negeri Syarif Hidayatullah, Dept. of Physics, Jakarta, Indonesia
* Corresponding author: email@example.com
We have investigated structure, magnetic and dielectric of La0.5Sr0.5Fe0.9Mn0.05Ti0.05O3 (LSFMTO) system using ultrasonic mixing method. LSFMTO system is driven by 40 kHz frequency and calcinate process up to 750°C for 30 minutes. Then sintering process also carried out by systematic various of temperature 900 °C, 1000 °C, and 1100 °C respectively, as same time previously. Very interestingly, the LSFMTO system exhibits ferroelectric (La,Sr)(Fe,Mn,Ti)O3 and ferromagnetic SrFe12019 properties and minor phase La2O3 by XRD interpretation analyzation. We have also carried out the measurement of LSFMTO system using a systematic applied the external magnetic field from 0 to 1 T and the electric polarization from 0 to 50 kV/m . The hysteresis curve of LSFMTO system shows the electricty coercive (Ec) increases while the saturation polarization (Pc) and the remanent polarization are tendency constant at the magnetic strength of 0.12 T. We believed that our finding of LSFMTO system is potensial to multiferroic material as magnetic sensor application.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.