MATEC Web Conf.
Volume 194, 2018Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment (HMTTSC-2018)
|Number of page(s)||4|
|Published online||21 August 2018|
Determination of heat-mass transfer coefficients within the apparatuses with jet-film contact devices
Kazan National Research Technological University, 420016 Kazan, Russia
2 Kazan State Power Engineering University, 420066 Kazan, Russia
* Corresponding author: firstname.lastname@example.org
One of the ways of intensifying the heat and mass transfer processes in gas-fluid systems is designing jet-film contact devices with a developed surface of phase contact at high flow velocities. A contact jet-film device has been developed. The results of numerical investigation of the operation of this device are presented. There were determined the coefficients of heat transfer to the air from the surface of liquid inside of the drain cup of contact device. The criterion equations of convective heat transfer for engineering calculations of jet-film contact devices is corrected.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.