Issue |
MATEC Web Conf.
Volume 194, 2018
Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment (HMTTSC-2018)
|
|
---|---|---|
Article Number | 01036 | |
Number of page(s) | 4 | |
DOI | https://doi.org/10.1051/matecconf/201819401036 | |
Published online | 21 August 2018 |
Heat-mass transfer efficiency within the cooling towers with jet-film contact devices
1
Kazan National Research Technological University, 420016 Kazan, Russia
2
Kazan State Power Engineering University, 420066 Kazan, Russia
* Corresponding author: ieremiada@gmail.com
Jet-film contact devices with special design elements for intensification of heat-mass transfer processes are proposed. An experimental apparatus has been created in order to study the interaction of water and air flows within these devices. It has been revealed that an increase in the ratio of mass flow rate of liquid and gas phases leads to a decrease in heat efficiency coefficient. Within the area of high values of specific loads, an increase in the local minimum of mass transfer efficiency is observed.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.