| Issue |
MATEC Web Conf.
Volume 192, 2018
The 4th International Conference on Engineering, Applied Sciences and Technology (ICEAST 2018) “Exploring Innovative Solutions for Smart Society”
|
|
|---|---|---|
| Article Number | 01048 | |
| Number of page(s) | 4 | |
| Section | Track 1: Industrial Engineering, Materials and Manufacturing | |
| DOI | https://doi.org/10.1051/matecconf/201819201048 | |
| Published online | 14 August 2018 | |
Improve inspection process in tire manufacturing by using computer simulation
Industrial Engineering Department, Faculty of Engineering, Rajamangala University of Technology Rattanakosin, Nakorn Pathom, Thailand
*
Corresponding author : sathitthep.san@rmutr.ac.th
The purity of this research was to study the feasibility of improving the quality inspection in the manufacturing of tire by focusing on the utilization process. The current plant production is continuous and there are four working groups which can be divided into 3 shifts with 24 hours produced a day (Average production capacity is 350 days per year). Improved quality inspection processes will inevitably result in unnecessary production stops. Therefore, the researchers have proposed a feasibility study on how to improve the quality of the test procedures using engineering and technology techniques. These create models that have the same functionality as the current working condition. The result was found that Model 2 could reduce unnecessary processes and also four workers per shift if the worker's wage was calculated. This model shows a cost reduction of approximately 1.68 million baht per year, as well as utilization process
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.