MATEC Web Conf.
Volume 192, 2018The 4th International Conference on Engineering, Applied Sciences and Technology (ICEAST 2018) “Exploring Innovative Solutions for Smart Society”
|Number of page(s)||4|
|Section||Track 1: Industrial Engineering, Materials and Manufacturing|
|Published online||14 August 2018|
Comparative study of dissimilar tailor-welded blanks between DP590 and DP980 dual phase steels
Department of Mechanical and Industrial Engineering, Faculty of Engineering, Rajamangala University of Technology, Krungthep, Bangkok, Thailand
2 Department of Production Engineering Technology, Faculty of Industrial and Technology, Rajamangala University of Technology, Rattanakosin, Prachubkirikhan, Thailand
Corresponding author: firstname.lastname@example.org
This research aims to study the dissimilar tailor-welded blanks between DP590 and DP980 dual phase steels using the autonomous GTAW process. The summarized results are as follows. It was found that utilized welding parameters in DP590 and DP980 steel butt joint were able to achieve complete penetration joint and there were not any defects. Furthermore, the dissimilar weld zone produced the hardness profilevalue between the DP590 and DP980 base metal. In particularly, DP590-HAZ region resulted in harden zone. Meanwhile, DP980-HAZ region induced a soften zone. By the way, the harden DP590-HAZ exhibited fine columnar martensite with a ferrite matrix. On the other hand, the soften DP980-HAZ represented a tempered martensite structures. Comparing the tensile test was carried out in order to investigate dissimilar welded joint strength in the different rolling directions. It was suggested that the specimen welded along to rolling direction was evidently larger tensile strength (1092 MPa) than the welding transverse to rolling direction (638 MPa). Moreover, the weakest fracture occurred apparently on the region of DP590-BM rather than the HAZ region.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.