| Issue |
MATEC Web Conf.
Volume 185, 2018
2018 The 3rd International Conference on Precision Machinery and Manufacturing Technology (ICPMMT 2018)
|
|
|---|---|---|
| Article Number | 00035 | |
| Number of page(s) | 10 | |
| DOI | https://doi.org/10.1051/matecconf/201818500035 | |
| Published online | 31 July 2018 | |
On the design and prototype manufacturing of multi-speed transmission device of bicycle
1
Department of Mechanical Engineering, Minghsin University of Science and Technology, ROC.
2
Department of Power Mechanical Engineering, National Formosa University, R.O.C
*
Corresponding author : lochsieh@nfu.edu.tw
The transmission systems of bicycles are multi-speed systems to satisfy different kinematic requirements. The transmission system of a bicycle can be the external changing-speed system or internal multi-speed system. A complete multi-speed transmission device of a bicycle must contain multi-speed gear unit, control device, and operating device. This paper focused on the systematic design and prototype manufacturing of multi-speed transmission device of a bicycle. Based on the results of kinematic design and meshing efficiency analysis, the systematic design of six-speed transmission device was carried out and prototype was manufactured to verify the design theorem.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.