| Issue |
MATEC Web Conf.
Volume 182, 2018
17th International Conference Diagnostics of Machines and Vehicles
|
|
|---|---|---|
| Article Number | 01001 | |
| Number of page(s) | 6 | |
| Section | Diagnostics of Machines and Vehicles | |
| DOI | https://doi.org/10.1051/matecconf/201818201001 | |
| Published online | 30 July 2018 | |
Electric public transport vehicle with composite material body diagnostic - user safety
Grupo de Estudios en Mantenimiento Industrial GEMI, departamento de ingenierÍa mecánica, Universidad EAFIT Antioquia, - COLOMBIA.
* Leonel Francisco Castañeda Heredia: lcasta@eafit.edu.co
The project contemplated the elaboration of modules of composite material, with which a bus body of less weight was built, compared with the traditional kind, and adapted for the chassis that are currently being used in the city. The structure was prepared for the evaluation of the security space of the future users. The panels were instrumented with different sensors and configured to the conditions of the test by means of a data acquisition system. The test was carried out following the procedure of regulation 66 of the UNECE. The results obtained demonstrated the feasibility of using this type of bodywork in public transport.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.