MATEC Web Conf.
Volume 182, 201817th International Conference Diagnostics of Machines and Vehicles
|Number of page(s)||10|
|Section||Diagnostics of Machines and Vehicles|
|Published online||30 July 2018|
The method of diagnosing glued joints subjected to static loads
Faculty of Mechanical Engineering, UTP University of Science and Technology in Bydgoszcz, al. Prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland
2 Faculty of Telecommunications, Computer Science and Electrical Engineering, UTP University of Science and Technology in Bydgoszcz, al. Prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland
* Corresponding author : email@example.com
The article presents a new type of sample developed for the purpose of assessing the strength of glued joints. The construction and the idea of testing glued joints were described in detail. In the article put a question: what geometric features of the sample significantly affect the change in the stress values at the measuring points S1, S2 and S3 under the influence of the acting bending moment? Analysis of the results of numerical calculations allowed to state that the width of the glued joint h, spacing of connectors L3 and the thickness of the upper beam g1 significantly affect the value of stresses in points S1, S2 and S3.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.