Issue |
MATEC Web Conf.
Volume 88, 2017
2016 International Conference on Biomaterials, Nanomaterials and Composite Materials (CBNCM 2016)
|
|
---|---|---|
Article Number | 02002 | |
Number of page(s) | 8 | |
Section | Chapter 2: Nano-materials and Composite materials | |
DOI | https://doi.org/10.1051/matecconf/20178802002 | |
Published online | 09 December 2016 |
Preparation and Characterizations of Composite Material Based on Carbon Fiber and Two Thermoset Resins
Beihang University of Aeronautics and Astronautics, Beijing, china
a Corresponding author: hanyfouda@buaa.edu.cn
In the present investigation, we used two types of thermoset resins (epoxy resin and phenol formaldehyde resin) with carbon fiber (CF) to produce composite materials. CF/epoxy resin composite and CF/phenolformaldhyde resin composite were fabricated and compared between their mechanical properties as compression, tension and flexural. it was found that mechanical properties of CF/epoxy composite higher than mechanical properties of CF/phenolformaldhyde resin composite such as flexural strength of CF/epoxy resin composite increased by 30 % than flexural strength of CF/phenolformaldhyde resin composite, tensile strength of CF/epoxy resin composite increased by 11.4 % than flexural strength of CF/phenolformaldhyde resin and axial compression strength of CF/epoxy resin composite increased by 14.5 % than flexural strength of CF/phenolformaldhyde resin.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.