| Issue |
MATEC Web Conf.
Volume 156, 2018
The 24th Regional Symposium on Chemical Engineering (RSCE 2017)
|
|
|---|---|---|
| Article Number | 08004 | |
| Number of page(s) | 5 | |
| Section | Membrane Science, Material and Technologies | |
| DOI | https://doi.org/10.1051/matecconf/201815608004 | |
| Published online | 14 March 2018 | |
Desalination of Sea Water Using Polymer Inclusion Membran (PIM) With Aliquat 336-TBP (Tributhyl Phosphate) as Carrier Compound
Departement Chemistry Faculty Sains and Mathematica Diponegoro University. Indonesia
* Corresponding author: choliddjunaidi@live.undip.ac.id
Desalination of Sea Water using Polymer Inclusion Membrane has been done. PIM is known has high stability membrane to overcome the instability of liquid membrane. PIM was placed among two phase : source phases was sea water and feed phases was aquadest. Efficiency of desalination is known by determining salinity concentration and ion Na+ in feed phases and stripping phases using refractometer and AAS. while membrane characterization is done using FTIR. SEM and UV-Vis spectroscopy. The PIM membrane that is produced has thin. transparent. clear and flexible properties. The result showed that PIM transport for 24 hours give the highest of salinity transport. there are 92.68% is transported from feed phases and 84.87% in stripping phases. Membrane characterization result by FTIR and UV spectroscopy showed that PIM membrane is stable enough.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.