| Issue |
MATEC Web Conf.
Volume 156, 2018
The 24th Regional Symposium on Chemical Engineering (RSCE 2017)
|
|
|---|---|---|
| Article Number | 08005 | |
| Number of page(s) | 10 | |
| Section | Membrane Science, Material and Technologies | |
| DOI | https://doi.org/10.1051/matecconf/201815608005 | |
| Published online | 14 March 2018 | |
Oilfield Produced Water Reuse and Reinjection with Membrane
1
E Department of Petroleum Engineering, Institut Teknologi Bandung, Jl. Ganesha 10, Bandung 40132, Indonesia
2
PPPTMGB LEMIGAS, Balitbang KESDM, Jl. Ciledug Raya, Kav. 109, Cipulir, Kebayoran Lama, Jakarta 12230, Indonesia
3
Department of Chemical Engineering, Institut Teknologi Bandung, Jl. Ganesha 10, Bandung 40132, Indonesia
* Corresponding author: igw@che.itb.ac.id
Produced water has become a global environmental issue due to its huge volume and toxicity that may pose detrimental effects on receiving environment. Several approaches have been proposed to provide a strategy for produced water handling such as reinjection, reuse, or discharge. With various advantages, membrane technology has been increasingly used in produced water treatment replacing the conventional technologies. However, fouling is a major drawback of membrane processes in this application which needs to be controlled. This paper gives an overview and comparison of different produced water management. Special attention is given to produced water treatment for reuse purpose. Furthermore, the use of membrane processes in produced water reuse including performance, challenges, and future outlook are discussed.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.