Issue |
MATEC Web Conf.
Volume 153, 2018
The 4th International Conference on Mechatronics and Mechanical Engineering (ICMME 2017)
|
|
---|---|---|
Article Number | 06008 | |
Number of page(s) | 5 | |
Section | Researching and Designing of Machines and Mechanisms | |
DOI | https://doi.org/10.1051/matecconf/201815306008 | |
Published online | 26 February 2018 |
Magnetic Microfluidic Linear Halbach Array Configuration for Cell Separation
1
School of Life Science, Département of Biomédical Engineering, Beijing Institute of Technology, Beijing 100081, China.
2
Faculty of science and Technology, Department of Biomedical Physics, ALNeelain University, Khartoum 1121, Sudan.
The different type of blood entities like red blood cells (RBCs), white blood cell (WBCs) and platelets counts is a critical point in routine medical tests. Circulating tumor cells (CTCs) counting and analysing in the blood is indicative of the stage and origin of cancer in particular time. Here we are describing a proposed microfluidic device, used a magnetic means for CTCs separation from a blood or buffer sample. The device characterizations were simulated using COMSOL MULTIPHYSICS software as well as practically validated. Using a known spiked number of CTCs in the sample, the purity and recovery rate were calculated to be 93% and respectively.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.