MATEC Web Conf.
Volume 151, 20182017 Asia Conference on Mechanical and Aerospace Engineering (ACMAE 2017)
|Number of page(s)||4|
|Section||Fluid Mechanics and Computation|
|Published online||21 February 2018|
Measurement of Mutual Interference Sound of Columnar Objects in Air Flow
Graduate student of Mechanical Engineering, National Defense Academy, Hashirimizu 1-10-20, Yokosuka-shi, Kanagawa 239-8686, Japan
2 Department of Mechanical Engineering, National Defense Academy, Hashirimizu 1-10-20, Yokosuka-shi, Kanagawa, 239-8686, Japan
When a columnar object is put in a flow, Karman vortex is formed, and aerodynamic noise is generated. It is known that when multiple columnar objects are put in a flow, the flow state becomes complex. This can be known by flow visualization experiment. On other hands, there are few researches on flow sound in the case of mutual interference, that it is not as far as the authors know. Measurement of flow sound is performed using a microphone. Therefore, it is necessary to confirm the sound of the interference flow field reaches the microphone outside the flow field without changing. In this research, experiments were measured to confirm flow sound transmits to a microphone placed outside the flow field without changing. Based on the results, the aerodynamic noise measurement from the columnar object was performed using a low noise wind tunnel experimental apparatus. As a result, it was obtained that some findings on the sound of flow in mutual interference flow field
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.