MATEC Web Conf.
Volume 141, 2017The Fifth International Youth Forum “Smart Grids 2017”
|Number of page(s)||4|
|Published online||12 December 2017|
Potential of composite fuel application based on low-grade coal and wastes of forest and flour industry
National Research Tomsk polytechnic university, 634050 Tomsk, Russia
* Corresponding author: firstname.lastname@example.org
Composite fuels based on low-grade brown coal of 3B-grade mixed with forest and flour industry wastes were studied. Three compositions with similar weight content of forest industry waste and low-grade coal as well as flour industry waste in concentration range from 0 to 15 wt. %. The chemical properties and ignition characteristics of samples were studied by means of TG-analysis at air medium and 10 K/min heating rate in temperature range 50-600 °C. The samples with 15 wt. % content of flour waste were found to have higher burnout degree (up to 21.17 %) and mechanical endurance while having lower heating value (up to 6 %) and higher ignition temperatures (up to 24 °C) compared to samples with no flour industry wastes.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.