MATEC Web Conf.
Volume 110, 2017International Youth Scientific Conference “Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment” (HMTTSC 2017)
|Number of page(s)||4|
|Published online||19 June 2017|
Research of composite fuels thermophysical properties based on low-grade coals with addition of fine sawdust and flour industry wastes
National Research Tomsk polytechnic university, 634050 Tomsk, Russia
* Corresponding author: firstname.lastname@example.org
Experimental studies have been carried out to determine the energy and technical characteristics of composite fuels from coal grade 3B (Balakhtinskoye deposit), fine waste and flour from the milling industry. An effective concentration of 50% / 50% composite fuel has been established without the addition of a flour component, in which the combustion heat is reduced by less than 8%, with the flour component added up to 15%, the heat of combustion further decreases less than 2% of the heat of combustion of homogeneous coal. At the same time, the ash content is reduced to 11%, the yield of volatile components remains at the concentration level of the composite fuel of coal and wood. It is established that this component composition of three types of fuel is suitable for the formation of fuel briquettes suitable for burning in furnaces of small power boilers.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.