| Issue |
MATEC Web of Conferences
Volume 47, 2016
The 3rd International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2015)
|
|
|---|---|---|
| Article Number | 01015 | |
| Number of page(s) | 5 | |
| Section | Cementitious, Concrete and Sustainable Materials | |
| DOI | https://doi.org/10.1051/matecconf/20164701015 | |
| Published online | 01 April 2016 | |
The Effect of Lime Addition on the Setting Time and Strength of Ambient Cured Fly Ash Based Geopolymer Binder
Department of Civil Engineering, Tadulako University, Palu 94118, Indonesia
a Corresponding author : adam.arham@gmail.com
One of the limitations of geopolymer as the alternative binders in concrete is the necessity of heat curing. This study aimed to produce fly ash geopolymer binder subjected to ambient curing by adding a small proportion of lime and varying the activator dosage. The Class F fly ash from Mpanau coal-fired power plant was mixed with alkaline solution consists of sodium silicate and sodium hydroxide with Na2O dosage of 5%, 7%, and 9%. To achieve ambient cured paste, 8%, 9%, and 10% slaked lime was added as the substitute for the fly ash. The setting time test was conducted for each mix and the compressive strength was performed at age of 7, 14 and 28 days. The test result shows that the setting time of the fly ash based geopolymer paste can be controlled by adding a small proportion of slaked lime. The addition of lime increased strength but decreased the setting time.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.