Issue |
MATEC Web Conf.
Volume 212, 2018
2018 International Scientific Conference “Investment, Construction, Real Estate: New Technologies and Special-Purpose Development Priorities” (ICRE 2018)
|
|
---|---|---|
Article Number | 01001 | |
Number of page(s) | 8 | |
Section | New materials, Structures and Technologies for Construction in Specific Conditions of Siberia and the Far East | |
DOI | https://doi.org/10.1051/matecconf/201821201001 | |
Published online | 15 October 2018 |
Research on the welded seams of aluminum alloys using super-miniature eddy current transducers
Altai State University, 65604, Lenina ave., 61, Barnaul, Russia
* Corresponding author: osys11@gmail.com
Based on the eddy current transducer of the transformer type, a measuring system has been developed that makes it possible to investigate the welded joints obtained by friction stir welding (FSW). The main technical information about the eddy current converter being used is given, and a measurement procedure is described that allows to search for defects in welded seams of aluminum plates. The device allows to automatically change the main operating frequency of the device and the cutoff frequency of the filtration system. The experiments were carried out on aluminum-magnesium alloy plates being connected by friction welding. In the article, the results of measurements are presented, allowing to estimate the quality of a welded seam and to answer a question on reliability of welding.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.