| Issue |
MATEC Web Conf.
Volume 125, 2017
21st International Conference on Circuits, Systems, Communications and Computers (CSCC 2017)
|
|
|---|---|---|
| Article Number | 04002 | |
| Number of page(s) | 6 | |
| Section | Computers | |
| DOI | https://doi.org/10.1051/matecconf/201712504002 | |
| Published online | 04 October 2017 | |
Diagnostic System of Drill Condition in Laminated Chipboard Drilling Process
1 University of Life Sciences, Warsaw, Poland
2 Warsaw University of Technology, Warsaw, Poland
3 Military University of Technology, Warsaw, Poland
* Corresponding author: jaroslaw_kurek@sggw.pl
The paper presents an on-line automatic system for recognition of the drill condition in a laminated chipboard drilling process. Two states of the drill are considered: the sharp enough (still able to drill holes acceptable for processing quality) and worn out (excessive drill wear, not satisfactory from the quality point of view of the process). The automatic system requires defining the diagnostic features, which are used as the input attributes to the classifier. The features have been generated from 5 registered signals: feed force, cutting torque, noise, vibration and acoustic emission. The statistical parameters defined on the basis of the auto regression model of these signals have been used as the diagnostic features. The sequential step-wise feature selection is applied for choosing the most discriminative set of features. The final step of recognition is done by support vector machine classifier working in leave one out mode. The results of numerical experiments have confirmed good quality of the proposed diagnostic system.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.