Issue |
MATEC Web Conf.
Volume 118, 2017
VII International Congress on Combustion Engines
|
|
---|---|---|
Article Number | 00016 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/matecconf/201711800016 | |
Published online | 24 July 2017 |
Exhaust emissions from small engines in handheld devices
Poznan University of Technology, Faculty of Machines and Transport, 60-965 Poznan, ul. Piotrowo 3, Poland
* Corresponding author: piotr.lijewski@put.poznan.pl
The paper presents the results of investigations on the exhaust emissions carried out under real operating conditions of gasoline engines operating in a power generator and a chainsaw. During the operation of these devices the authors measured the following exhaust emissions: CO, HC, NOx and CO2. For the measurements the authors used a portable exhaust emission analyzer SEMTECH DS by SENSORS. This analyzer measures the concentrations of the exhaust gas components in an on-line mode while the engine is running under real operating conditions (road, field etc.). The exhaust emissions tests of non-road engine applications are performed on engine test beds in the NRSC (ISO 8178) and NRTC tests. The presented method is a new solution in determining of the exhaust emissions from such engines. The obtained results were compared with the applicable emission requirements. Besides, based on the performed investigations, the authors attempted an evaluation of the possibilities of the use of the measurement method for development works related to the reduction of the emission from small gasoline engines.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.