Issue |
MATEC Web Conf.
Volume 111, 2017
Fluids and Chemical Engineering Conference (FluidsChE 2017)
|
|
---|---|---|
Article Number | 02012 | |
Number of page(s) | 6 | |
Section | Advances in Chemical and Environmental Engineering | |
DOI | https://doi.org/10.1051/matecconf/201711102012 | |
Published online | 20 June 2017 |
Material Balance And Reaction Kinetics Modeling For Penex Isomerization Process In Daura Refinery
1 University of Technology, Chemical Engineering Department, Baghdad - Iraq
2 Midland Refineries Company, Daura Refinery, Baghdad - Iraq
Penex Deisohexanizer isomerization of light straight run naphtha is a significant process for petroleum refining and proved to be effective technology to produce gasoline components with a high octane number. Modeling of the chemical kinetic reactions is an important tool because it is a better tool for optimization of the experimental data into parameters used for industrial reactors. The present study deals on the isomerization process in Daura refinery. Material balance calculations were done mathematically on the unit for the kinetics prediction purpose. A kinetic mathematical model was derived for the prediction rate constants K1 and K2 and activation energy Ea at operating temperatures range 120-180°C. According to the model, the results show that with increasing of temperature leads to increased K1 directly, where the K2 values proportional inversely. The activation energy results show that Ea1(nC6)<Ea1(C5)<Ea1(CH), and for Ea2(iC5)<Ea2(2,2-DMB)<Ea2(2,3-DMB)<Ea2(MCP)..
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.