| Issue |
MATEC Web Conf.
Volume 104, 2017
2017 2nd International Conference on Mechanical, Manufacturing, Modeling and Mechatronics (IC4M 2017) – 2017 2nd International Conference on Design, Engineering and Science (ICDES 2017)
|
|
|---|---|---|
| Article Number | 02003 | |
| Number of page(s) | 6 | |
| Section | Chapter 2: Engineering Simulation, Modeling and Mechatronics | |
| DOI | https://doi.org/10.1051/matecconf/201710402003 | |
| Published online | 14 April 2017 | |
The Transfer efficiency analysis and modeling technology of new non - contact power transmission equipment
1 School of Mechanical Engineering, Nanjing University of Science and Technology, 210094 Nan Jing, China
2 School of Mechanical Engineering, Beijing Institute of Technology, 100081 Bei Jing, China
a Corresponding author: zns@ustc.edu.cn
Due to the shortcomings of current power transmission which is used in ultrasound - assisted machining and the different transfer efficiency caused by the related parameters of the electromagnetic converter, this paper proposes an analysis model of the new non-contact power transmission device with more stable output and higher transmission efficiency. Then By utilizing Maxwell finite element analysis software, this paper studies the law of the transfer efficiency of the new non-contact transformer and compares new type with traditional type with the method of setting the boundary conditions of non-contact power supply device. At last, combining with the practical application, the relevant requirements which have a certain reference value in the application are put forward in the actual processing.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.