| Issue |
MATEC Web Conf.
Volume 102, 2017
V International Forum for Young Scientists “Space Engineering”
|
|
|---|---|---|
| Article Number | 01038 | |
| Number of page(s) | 4 | |
| Section | Applied Aerospace Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201710201038 | |
| Published online | 15 March 2017 | |
Determination of the weld thickness of turbine for aircraft engine by high-energy X-ray tomography
Tomsk Polytechnic University, 634050 Tomsk, Russia
* Corresponding author: chakhlov@tpu.ru
It is necessary to test the weld thickness of turbine, as it is one of the most important parts for aircraft engine. The weld thickness of turbine for aircraft engine by high-energy X-ray tomography was determined. We used an X-ray tube and a betatron as X-ray sources. The wall thickness of two tubes and weld thickness of turbine were measured. It is shown that the high-energy X-ray tomography system is determined the wall thickness of the tube and the weld thickness of turbine with high accuracy. We also studied the method to reduce scattered radiation. All experiments were carried out in the non-destructive testing (NDT) Institute of Tomsk Polytechnic University (TPU).
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.