| Issue |
MATEC Web Conf.
Volume 158, 2018
VI International Forum for Young Scientists “Space Engineering 2018”
|
|
|---|---|---|
| Article Number | 01016 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/matecconf/201815801016 | |
| Published online | 19 March 2018 | |
Betatron radiography and tomography of steel castings with large thickness
Russian–Chinese Laboratory of Radiation Testing and Inspection, National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
* Corresponding author: batranin@tpu.ru
Steel castings with large thickness are widely used in different areas of industry and the control of steel castings with large thickness is becoming more and more important in order to detect defects and ensure the reliability. In this paper, we carry out betatron radiography and tomography to control the steel castings with large thickness and check the potential ability of Inspection and Examination System (IES) for a high-energy betatron tomography. The results of betatron radiography and tomography of steel castings with large thickness are presented and compared with precedent work, which shows that the IES is considered a promising high-energy tomography system.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.