MATEC Web Conf.
Volume 101, 2017Sriwijaya International Conference on Engineering, Science and Technology (SICEST 2016)
|Number of page(s)||5|
|Section||Advances in Materials Science & Technology|
|Published online||09 March 2017|
Mechanical and physical properties of metakaolin based geopolymer paste
1 Civil Engineering Department, Engineering Faculty, Universitas Negeri Malang, Malang, Indonesia
2 Mechanical Engineering Department, Engineering Faculty, Universitas Negeri Malang, Malang, Indonesia
* Corresponding author: email@example.com
This paper presents the result of studies on utilizing metakaolin obtained from Belitung as fly ash substitute material to produce geopolymer paste. Mechanical properties were assessed by compressive strength while physical properties were assessed by setting time, porosity, microstructure test and density test. The experiment was performed on geopolymer paste with 0, 25%, 50%, 75% and 100% fly ash replacement with metakaolin. Sodium Hidroxide (NaOH) with concentration of 10 Molars and Sodium Silicate (Na2SiO3) were used as alkaline activator. In addition, activator ratio between sodium silicate to sodium hidroxide of 2 was applied. The result obtains that increasing metakaolin contain in mixture deliver longer setting time, higher open pore number, lower density and lower compressive strength of geopolymer paste. However, adding metakaolin up to 25 % into geopolymer paste mixture could increase mechanical and physical properties of geopolymer paste.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.