| Issue |
MATEC Web Conf.
Volume 97, 2017
Engineering Technology International Conference 2016 (ETIC 2016)
|
|
|---|---|---|
| Article Number | 01031 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/matecconf/20179701031 | |
| Published online | 01 February 2017 | |
Chemical and Physical Characterization of Fly Ash as Geopolymer Material
1 Department of Civil Engineering, Universitas Negeri Malang, Malang, Indonesia
2 Departement of Mechanical Engineering, Universitas Negeri Malang, Malang, Indonesia
3 Departement of Civil Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
4 Konsorsium Riset Geopolimer Indonesia (KORIGI), Lab Beton dan Bahan Bangunan ITS, Surabaya, Indonesia
* Corresponding author: puput.risdanareni.ft@um.ac.id
Research on finding suitable cement substitute material becomes massive due to environmental effect. Geopolymer as inorganic material is potential to be the smart solution to overcome global warming issue. Fly ash is a waste material rich in silica and alumina becomes popular raw material to produce geopolymer. The best properties ofgeopolymer paste come from the high quality of fly ash. Therefore, it is important to investigate various types of fly ash and geopolymer properties. Their chemical and physical properties characterized by XRF, pH value, XRD and SEM. The results showed that type of fly ash depended on amount of Si-based of Ca-based compound which consisted of spherical morphology. Geopolymer paste produced from the ash with different compound has bulky and irregular shape morphology. The pH value of each ash has also a correlation with the setting time of fresh paste.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.