| Issue |
MATEC Web of Conferences
Volume 61, 2016
The International Seminar on Applied Physics, Optoelectronics and Photonics (APOP 2016)
|
|
|---|---|---|
| Article Number | 02023 | |
| Number of page(s) | 4 | |
| Section | Chapter 2 Electronic Technology and Electrical Engineering | |
| DOI | https://doi.org/10.1051/matecconf/20166102023 | |
| Published online | 28 June 2016 | |
Parametric Design and Rapid Prototyping of Installation Box for Vehicle Terminal PCB
School of Mechanical Engineering, Nantong University, 226019, Nantong, China
a wangxx@ntu.edu.cn
b ni.hj@ntu.edu.cn (corresponding author)
Installation box for vehicle terminal PCB (Printed Circuit Board) was took as research object, which is encountered in the process of project developing. Vehicle terminal PCB in actual development process was set as an example, point cloud data were acquired by three coordinate measuring method; Imageware software was used to reconstruct the vehicle terminal PCB model, basic size parameters of vehicle terminal PCB can be got and then design parameters of installation box for vehicle terminal PCB can be determined. Design of the installation box for vehicle terminal PCB was completed based on Solidworks software, then 3D modeling and 2D drawing of installation box for vehicle terminal PCB was gained. Up Plus 2 rapid prototype machine was used to manufacture installation box for vehicle terminal PCB rapidly based on 3D printing technology, then prototype of installation box for vehicle terminal PCB was obtained. It is of certain engineering significant for single (small amount) manufacturing of installation box for general PCB.
Key words: Parametric Design / 3D Modeling / Rapid Prototyping / 3D Printing / Installation Box
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.