Modelling and Design of a 3 kW Permanent Magnet Synchronous Generator suitable for Variable Speed Small Wind Turbines
Lecturer, Department of Electrical and Electronics Engineering, Kathmandu University, Dhulikhel, Nepal
2 Assistant Professor, Department of Electrical Engineering, Frederick University, Nicosia, Cyprus
3 PHD student, Department of Electrical Engineering, Frederick University, Nicosia, Cyprus
a Corresponding author: email@example.com
This paper presents the modeling and design of a 3 kW Permanent Magnet Synchronous Generator (PMSG) used for a variable speed wind turbine. Initially, the PMSG is modeled in the d-q reference frame. Different optimized parameters of the generator are extracted from the design and used in simulation of the PMSG. The generator output power is matched with the power of the turbine such that the generator is not either over-sized or under-sized.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.