Free Access to the whole issue

Open Access

About the conference

Published online: 11 April 2016

• PDF (272 KB)

Open Access

Statement of Peer review

Published online: 11 April 2016

• PDF (208 KB)

Chapter 1: Modeling and Simulation

Open Access

Aircraft Performance Analysis in Conceptual Design Phase based on System-of-Systems Simulations 01001

Yifeng Tian, Hu Liu and Jun Huang

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165201001

• Abstract
• PDF (1.376 MB)
• References

Open Access

Combined Cycle Fatigue Investigation Based on Energy Principle 01002

Mykyta Kalynenko

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165201002

• Abstract
• PDF (251.1 KB)
• References

Open Access

Circuit Modeling and EM Simulation Verification of DGS based Low-Pass Filter Employing Transmission Line Model along with Microstrip-Slotline Transitions 01003

Mouloud Challal, Mokrane Dehmas, Arab Azrar, Rabia Aksas and Mohamed Trabelsi

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165201003

• Abstract
• PDF (186.4 KB)
• References

Open Access

Requirements Engineering Model: Role Based Goal Oriented Model 01004

Sandfreni and Ir. Kridanto Surendro

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165201004

• Abstract
• PDF (257.8 KB)
• References

Open Access

Ant Foraging Behavior for Job Shop Problem 01005

Diyana Abdul Mahad and Zuhaimy Ismail

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165201005

• Abstract
• PDF (179.8 KB)
• References

Chapter 2: Design Optimization

Open Access

Comparative Calibration of Corrosion Measurements Using K-Nearest Neighbour Based Techniques 02001

Yaman Hamed, A’fza Shafie, Zahiraniza Bt Mustaffa and Naila Rusma Binti Idris

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165202001

• Abstract
• PDF (373.5 KB)
• References

Open Access

A Study on a Multi-Objective Optimization Method Based on Neuro-Response Surface Method (NRSM) 02002

Jae-Chul Lee, Ji-Ho Jeong, Hicham Kharoufi and Sung-Chul Shin

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165202002

• Abstract
• PDF (771.0 KB)
• References

Open Access

Design Optimization of ESD (Emergency ShutDown) System for Offshore Process Based on Reliability Analysis 02003

Jeong-hoon Bae, Sung-chul Shin, Byeong-cheol Park and Soo-young Kim

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165202003

• Abstract
• PDF (339.1 KB)
• References

Open Access

Product System Design – to Household Massage Design as An Example 02004

Huabin Wang and Qichao Lin

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165202004

• Abstract
• PDF (238.8 KB)
• References

Open Access

Effect of Local Constraint on Driving Torque of Driving Mechanism for Half-rotating Wing 02005

Huixing Wang, Xiaoyi Wang, Han Qiu, Fuqiang Chen, Zhizhen Qiu and Jianhua Shan

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165202005

• Abstract
• PDF (428.4 KB)
• References

Open Access

Research on the Application of Tactile Materials to Design and Printing of Books 02006

Yuanyuan Wang

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165202006

• Abstract
• PDF (101.9 KB)
• References

Open Access

Adaptive Robotic Systems Design in University of Applied Sciences 02007

Jos Gunsing, Fons Gijselhart, Nyke Hagemans, Hans Jonkers, Eric Kivits, Peter Klijn, Bart Kapteijns, Diederich Kroeske, Hans Langen, Bart Oerlemans et al. (2 more)

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165202007

• Abstract
• PDF (1.096 MB)
• References

Chapter 3: Innovation

Open Access

A Tooth Flank Crowning Method by Applying a Novel Crossed Angle Function Between the Hob Cutter and Work Gear in the Gear Hobbing Process 03001

Yu-Ren Wu, Van-The Tran and Ruei-Hung Hsu

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165203001

• Abstract
• PDF (204.3 KB)
• References

Open Access

In-Vitro Design Protocol: Artificial Situation Strategy Uses to Comprehend Designers’ Thought 03002

Rusmadiah Anwar, Shahriman Zainal Abidin and Oskar Hasdinor Hassan

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165203002

• Abstract
• PDF (962.1 KB)
• References

Open Access

The Application of Cloud Innovation in Industrial Design Education 03003

Li-jun Jiang, Bo Song, Jing Su and Zhe-lin Li

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165203003

• Abstract
• PDF (382.0 KB)
• References

Open Access

Modern Landscape Representation of Hakka Culture 03004

Hui Huang and Ruofei Gao

Published online: 11 April 2016

DOI: https://doi.org/10.1051/matecconf/20165203004

• Abstract
• PDF (1.635 MB)
• References