MATEC Web Conf.
Volume 78, 20162nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016)
|Number of page(s)||7|
|Published online||07 October 2016|
Review of Dolomite as Precursor of Geopolymer Materials
1 Center of Excellence Geopolymer and Green Technology, School of Materials Engineering, Universiti Malaysia Perlis (UniMAP), P.O. Box 77, D/A Pejabat Pos Besar, 01000, Kangar, Perlis, Malaysia
2 Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP), P.O. Box 77, D/A PejabatPosBesar, Kangar, Perlis 01000, Malaysia
* Corresponding author: email@example.com
Geopolymer is an environmentally friendly cementitious binder that does not require the existence of ordinary Portland cement (OPC). Geopolymer has many excellent advantages, including high early strength, low shrinkage, good thermal resistance and good chemical resistance. Previous commonly used materials include fly ash, clay and slag. The used of dolomite as precursor material in geopolymer field is still new and at the early stage of study. Only a few researchers have done studies on dolomite in geopolymer. Dolomite (CaMg(CO3)2) is abundant and generally inexpensive natural minerals. The possible use of these bulk calcium carbonate materials in improving the mechanical properties of geopolymers will therefore be of great interest. This paper summarizes some research outcomes on dolomite in geopolymer along with the potential of dolomite as geopolymer composites.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.