MATEC Web of Conferences
Volume 22, 2015International Conference on Engineering Technology and Application (ICETA 2015)
|Number of page(s)||6|
|Section||Electric and Electronic Engineering|
|Published online||09 July 2015|
Simulation Study of AC Contactor Dynamic Contacts Contact Pressure Based on ADAMS
Handan College, Handan, Hebei, China
* Corresponding author: firstname.lastname@example.org
A multi-body dynamics simulation model of CJ20-25 AC contactor was established with Pro/E（Pro/Engineer)in this paper. A coupling simulation with machine, electric, magnetic on the contactor has been achieved in this model. Dynamic parameters which were called use the secondary development technology of ADAMS. The dynamic contact pressure signal of an AC contactor was obtained with ADAMS’s own simultaneous solution such as electromagnetic suction, kinematics and dynamics equations. The simulation results and actual measurement of contactor contact pressure signals are very similar. However, the complexity of the measured contacts vibration is greater than the simulation results because the actual working condition is more complex. This result provides a theoretical foundation to the dynamic contacts contact pressure test.
Key words: AC contactor / coupling simulation / ADAMS / dynamic contacts contact pressure
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.