| Issue |
MATEC Web of Conferences
Volume 11, 2014
International Congress on Materials & Structural Stability
|
|
|---|---|---|
| Article Number | 01026 | |
| Number of page(s) | 7 | |
| Section | Materials & Pathologies | |
| DOI | https://doi.org/10.1051/matecconf/20141101026 | |
| Published online | 28 April 2014 | |
Using New Coating Materials for Corrosion Prevention of Reinforced Concrete
1 Lecturer at Housing & Building National Research Centre 87 El-Tahrir St., Dokki, Giza, Egypt
a e-mail: materialhnbrc@yahoo.com, http://www.hbrc.edu.eg, +201099978795
Deterioration of reinforcing concrete structures is a common problem among all the Mediterranean countries. To protect steel from corrosion, cobalt oxide with zinc oxide were successfully deposited on silica and alumina layer according to Core–shell theory. This theory based on depositing a surface layer of expensive efficient anticorrosive coating on a cheap extender expressing the bulk. The combination of both core and shell compounds led to the production of new coating with improved properties different from each of its individual components. These improved properties lead to change in the efficiency of protection properties of coating films containing these new coating. The objective of the present work is to prepare a new ecologically friendly natural and inorganic coating of Egyptian mix (kaolin and ceramic waste) and zinc phosphate as corrosion inhibitors based on the solid–solid interaction to protect steel from corrosion in buildings construction. The results revealed that these new coating gives the best results in protecting steel substrates from corrosion especial in aggressive environment.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.