Issue |
MATEC Web of Conferences
Volume 11, 2014
International Congress on Materials & Structural Stability
|
|
---|---|---|
Article Number | 01027 | |
Number of page(s) | 5 | |
Section | Materials & Pathologies | |
DOI | https://doi.org/10.1051/matecconf/20141101027 | |
Published online | 28 April 2014 |
Use of metallic fibers in concretes
University of A/MIRA, Department de civil engineering, Bejaia, Algeria
Laboratory Engineering Building and Architecture
The addition of a waste (fibers) in construction materials, particularly, the concretes is a technique increasingly used, for several reasons, either ecological, or economic, or to improve some properties in a fresh or hardened state. In our work we studied the behavior of the concrete and the mortar containing metallic fibers resulting from the unit BCR which is in Bordj-Menaiel in Algeria (metallic fibers resulting from the rejection at the end of the domestic operation of silvering of the tools and which is stored in plastic bags which are preserved in metal containers). Our work consists to study the behavior of the concretes and the mortars containing these fibers of cement substitution. We noted that the use of these fibers in the concretes in substitution of cement decreases its of compressive strength and flexural strength but to 10% of waste these strength remain acceptable.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.