Issue |
MATEC Web Conf.
Volume 120, 2017
International Conference on Advances in Sustainable Construction Materials & Civil Engineering Systems (ASCMCES-17)
|
|
---|---|---|
Article Number | 03012 | |
Number of page(s) | 9 | |
Section | Recycling for Sustainable Concrete | |
DOI | https://doi.org/10.1051/matecconf/201712003012 | |
Published online | 09 August 2017 |
Performance of concrete blended with pozzolanic materials in marine environment
NED University of Engineering and Technology, Karachi - 75270, Pakistan
* Corresponding author: asadkhan@neduet.edu.pk
Reinforced concretes structures located at or near the coast line needs to be repaired more frequently when compared to structures located elsewhere. This study is continuation of previous studies carried out at the Department of Civil Engineering, NED University of Engineering and Technology, Karachi, Pakistan to study the performance of concrete made up of cements blended by pozzolonic materials. Different pozzolanic materials (blast furnace slag, fly ash and silica fume) were used in the study. Tests conducted during the study to compare the performance of samples cast from concrete of different mix designs were Compressive Strength Test (ASTM C 39), Flexural Strength Test (ASTM C 293), Rapid Migration Test (NT Build 492), Absorptivity of the oven-dried samples (ASTM C 642) and Half Cell Potential (ASTM C 876). Use of cements blended with pozzolanic materials, used during the study, proved to be effective in enhancing the performance of the concrete exposed to marine environment. Use of pozzolans in concrete not only provides a sustainable and feasible solution to the durability problems in coastal areas, it also helps in conservation of natural resources and reduction of pollution and energy leading to a green environment.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.