| Issue |
MATEC Web Conf.
Volume 278, 2019
2018 2nd International Conference on Building Materials and Materials Engineering (ICBMM 2018)
|
|
|---|---|---|
| Article Number | 01002 | |
| Number of page(s) | 5 | |
| Section | Building Materials and Applications | |
| DOI | https://doi.org/10.1051/matecconf/201927801002 | |
| Published online | 08 April 2019 | |
Effect of Curing Conditions on Physical Properties of Mortar Blended with Expansive Agent
1
Graduate Scohool of Eng., Tokai University, HIratsuka, Kanagawa Japan
2
Chiba Institute of Technology Narashino, Chiba, Japan
3
Tokai University, Hiratsuka, Kanagawa, Japan
Assuming precast concrete using expansion material, we will confirm the influence of curing conditions on the basic physical properties of mortar with regard to the free expansion coefficient, constraint expansion coefficient and strength, using two types of expansive materials widely used in Japan . As a result, it was confirmed that the higher the curing temperature, the higher the strength regardless of the addition of the expansion material. In addition, it was confirmed that both the free expansion coefficient and the constrained expansion ratio had an effect irrespective of the curing temperature of the lime type expansion material.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.