| Issue |
MATEC Web Conf.
Volume 278, 2019
2018 2nd International Conference on Building Materials and Materials Engineering (ICBMM 2018)
|
|
|---|---|---|
| Article Number | 01003 | |
| Number of page(s) | 6 | |
| Section | Building Materials and Applications | |
| DOI | https://doi.org/10.1051/matecconf/201927801003 | |
| Published online | 08 April 2019 | |
Basic Research of Improving the Mortar Flow by Thermal Stimulation to Superplasticizer
1
Graduate School of Eng., Tokai University, Hiratsuka, Kanagawa Japan
2
Tokai Uniersity, Hiratsuka, Kanagawa Japan
Polycarboxylic acid-based superplasticizers are being used for various fields of concrete work, however little has reported on changing basic performance by thermal fluctuation. In this study, heating superplasticizers itself is hereinafter as referred to as “thermal stimulation”, the effect of thermal stimulation and heat retention of superplasticizer on the fresh mortar, moreover the influence of molecular structural changed of superplasticizer by thermal stimulation were investigated. As the result, it was confirmed that improving fluidity of the mortar flow on this condition the highly heat temperature and heat over a long time by thermal stimulation of superplasticizer. In addition, it turned out that this phenomenon was caused molecular structural changed by thermal stimulation, and the result was revealed that the effect of thermal stimulation varies according to the type of polymer.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.