| Issue |
MATEC Web Conf.
Volume 226, 2018
XIV International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2018)
|
|
|---|---|---|
| Article Number | 02007 | |
| Number of page(s) | 7 | |
| Section | 2 Non-linear dynamics and applied synergetics in technical systems | |
| DOI | https://doi.org/10.1051/matecconf/201822602007 | |
| Published online | 07 November 2018 | |
Design controler of the quasi-time optimization approach for stabilizing and trajectory tracking of inverted pendulum
1 Automation & Engineering Department, Le Quy Don Technical University, Hanoi, Vietnam
2 Department of Software Engineering, Le Quy Don Technical University, Hanoi, Vietnam
* Corresponding author: nguyenxuanchiem83@gmail.com
This article describes the method of stabilizing and tracking the trajectory of the inverted pendulum with the quasi-time optimization approach. The controller proposed in this paper is not only to stabilize the inverted pendulum in a vertical position but also to cause the inverted pendulum to follow a predetermined reference signal even when there is an interference effect. The focus of this project is the design of a quasi-time control law based on the quasi-time optimization approach and Lyapunov stability theory. The simulation and experimental results suggest that the proposed controller controls the inverted pendulum balance and cart position stability which are better than the LQR method even when there is an external disturbance effect.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.