| Issue |
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
|
|
|---|---|---|
| Article Number | 06004 | |
| Number of page(s) | 8 | |
| Section | Modelling of structural materials, composites and nanomaterials | |
| DOI | https://doi.org/10.1051/matecconf/201815706004 | |
| Published online | 14 March 2018 | |
Analysis of torque cam mechanism
Faculty of Pruduction Technology and Management Jan Evangelista Purkyně University in Ústí nad Labem, Department of Machines and Mechanics, 400 96, Pausterova 1, Ústí n/L, Czech Republic
* Corresponding author: hren@fvtm.ujep.cz
The article deals with the process of torque camshaft at a constant speed. The method of release was determined by the normal force acting between the cam and the tappet. Subsequently, was expressed torque. A prerequisite for the calculations are a constant friction coefficient between the components of the mechanism and constant speed of the camshaft. Cam used for the purposes of this study generated polynomial lifting dependence. Part of this work is the calculation methodology lifting addiction. Course of torque is the conclusion presented on the values of the corresponding measuring station, which is the result of previous work on the subject.
Key words: cam / polynomial stroke / flat cam / hoist / torque.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.