Issue |
MATEC Web Conf.
Volume 254, 2019
XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
|
|
---|---|---|
Article Number | 02030 | |
Number of page(s) | 8 | |
Section | Modelling and Simulation, Structural Optimization | |
DOI | https://doi.org/10.1051/matecconf/201925402030 | |
Published online | 15 January 2019 |
Design of cam driving test equipment
Faculty of Pruduction Technology and Management Jan Evangelista Purkyně University in Ústí nad Labem, Department of Machines and Mechanics, 400 96, Pausterova 1, Ústí n/L, Czech Republic
* Corresponding author: hren@fvtm.ujep.cz
The work deals with the design of a test equipment designed for fatigue testing of the cutter bed. The disk cam drives the rocker, which is pressed against the cam surface by the coil spring. The test drum (buchar) copies the movement of the rocker to generate the exciting force that is loaded by the bed of the milling cutter. Based on unmatched data, the Wohler curve will be determined. This article deals only with parts of the design station. In particular, the design of the cam will be discussed here.
Key words: cam / polynomial stroke / flat cam / torque
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.