| Issue |
MATEC Web Conf.
Volume 91, 2017
The Fourth International Youth Forum “Smart Grids 2016”
|
|
|---|---|---|
| Article Number | 01019 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/matecconf/20179101019 | |
| Published online | 20 December 2016 | |
Purification of gas Emissions From Thermal Power Plants by Means of Apparatus with Jet-Bubbling Contact Devices
1 Kazan National Research Technological University, 420016 Kazan, Russia
2 Kazan State Power Engineering University, 420066 Kazan, Russia
* Corresponding author: ilnyr_91@mail.ru
A jet-bubble contact device is designed to enhance the operation efficiency of heat and mass exchange units. New devices should be introduced for the contact of gas and liquid, which can provide the minimum entrainment of liquid by the gas flow and have a high phase contact area and relatively low hydraulic resistance. Results of study of a resistance of the dry layer of contact elements at design parameters of jet-bubbling contact devices have been presented. Influence of average gas consumption rate on the specific hydraulic resistance of jet-bubbling contact devices has been analyzed.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.