Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

A microstructural modification strategy to improve thermal conductivity of tool steels produced by laser powder bed fusion

Siyuan Qin, Simone Herzog, Anke Kaletsch and Christoph Broeckmann
Materials Characterization 211 113917 (2024)
https://doi.org/10.1016/j.matchar.2024.113917

Towards lube-free aluminum high pressure die casting using duplex AlCrN physical vapor deposition coatings

Nelson Delfino de Campos Neto, Ryan Brune, Alan A. Luo, Paul Brancaleon, Andras L. Korenyi-Both, Stephen P. Midson and Michael J. Kaufman
Journal of Materials Research and Technology (2023)
https://doi.org/10.1016/j.jmrt.2023.05.022

The development of coating selection criteria to minimize die failure by soldering and erosion during aluminum high pressure die casting

N.D. Campos Neto, A.L. Korenyi-Both, C. Vian, S.P. Midson and M.J. Kaufman
Journal of Materials Processing Technology 316 117954 (2023)
https://doi.org/10.1016/j.jmatprotec.2023.117954

Analysis of Phenomenon of Plasticity Loss of Steel Core Made by Selective Laser Melting Method in Zone of Pressure Mould Conformal Cooling Channel

Jarosław Piekło and Aldona Garbacz-Klempka
Materials 16 (12) 4205 (2023)
https://doi.org/10.3390/ma16124205

A case study of mechanical and thermal fatigue of press hardening dies

K Chantziara, F Javadzadeh Kalahroudi, J Bergström, M Grehk and P Ulfberg
IOP Conference Series: Materials Science and Engineering 1238 (1) 012025 (2022)
https://doi.org/10.1088/1757-899X/1238/1/012025

The Numerical Fatigue Life Analysis of a Conformal HPDC Mould Core Additively Manufactured from Maraging Steel

Jarosław Piekło, Aldona Garbacz-Klempka and Andriy Burbelko
Materials 16 (1) 365 (2022)
https://doi.org/10.3390/ma16010365

Shape-Dependent Strength of Al Si9Cu3FeZn Die-Cast Alloy in Impact Zone of Conformal Cooling Core

Jarosław Piekło, Andriy Burbelko and Aldona Garbacz-Klempka
Materials 15 (15) 5133 (2022)
https://doi.org/10.3390/ma15155133

Evaluation of post-treatments of novel hot-work tool steel manufactured by laser powder bed fusion for aluminum die casting applications

A.M. Vilardell, S.B. Hosseini, M. Åsberg, A. Dahl-Jendelin, P. Krakhmalev, C. Oikonomou and S. Hatami
Materials Science and Engineering: A 800 140305 (2021)
https://doi.org/10.1016/j.msea.2020.140305

Use of Maraging Steel 1.2709 for Implementing Parts of Pressure Mold Devices with Conformal Cooling System

Jarosław Piekło and Aldona Garbacz-Klempka
Materials 13 (23) 5533 (2020)
https://doi.org/10.3390/ma13235533

Thermal fatigue analysis of H13 steel die adopted in pressure-die-casting process

V A Girisha, Manoj M Joshi, L J Kirthan, A Bharatish and Ramakrishna Hegde
Sādhanā 44 (6) (2019)
https://doi.org/10.1007/s12046-019-1111-3

Study of two alternative cooling systems of a mold insert used in die casting process of light alloy components

Federica Fiorentini, Pellegrino Curcio, Enrico Armentani, Carlo Rosso and Paolo Baldissera
Procedia Structural Integrity 24 569 (2019)
https://doi.org/10.1016/j.prostr.2020.02.050

Remanufacturing of die casting dies made of hot-work steels by using the wire-based electron-beam welding with an in situ heat treatment

T. Schuchardt, S. Müller and K. Dilger
Welding in the World 63 (6) 1669 (2019)
https://doi.org/10.1007/s40194-019-00785-2

Effect of die geometry on thermal fatigue of tool steel in aluminium alloy die-casting

R M Ghusoon, H M Rawaa and H A Basim
IOP Conference Series: Materials Science and Engineering 518 (3) 032042 (2019)
https://doi.org/10.1088/1757-899X/518/3/032042

Effect of laser parameters on surface roughness of laser modified tool steel after thermal cyclic loading

Annie Lau Sheng, Izwan Ismail and Syarifah Nur Aqida
IOP Conference Series: Materials Science and Engineering 319 012002 (2018)
https://doi.org/10.1088/1757-899X/319/1/012002

Effects of Heat Input on Microstructure, Corrosion and Mechanical Characteristics of Welded Austenitic and Duplex Stainless Steels: A Review

Ghusoon Mohammed, Mahadzir Ishak, Syarifah Aqida and Hassan Abdulhadi
Metals 7 (2) 39 (2017)
https://doi.org/10.3390/met7020039