Utility of an unitary-shredding method to evaluate the conditions and selection of constructional features during grinding
MATEC Web Conf., 157 (2018) 05016
Published online: 2018-03-14
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Energy-Dependent Particle Size Distribution Models for Multi-Disc Mill
Weronika Kruszelnicka, Marek Opielak, Kingsly Ambrose, Saugirdas Pukalskas, Andrzej Tomporowski and Patrycja WalichnowskaMaterials 15 (17) 6067 (2022)
https://doi.org/10.3390/ma15176067
Design and Construction of an Innovative Particle Analyser
Daniel Łączny, Jakub Lewandowski, Weronika Kruszelnicka, et al.MATEC Web of Conferences 357 07006 (2022)
https://doi.org/10.1051/matecconf/202235707006
Directions of Development of Adaptive Systems to the Operating Conditions of Mobile Wood Chopping Machines with Low Power Engines
Łukasz Warguła, Mateusz Kukla, Piotr Krawiec, et al.MATEC Web of Conferences 357 04002 (2022)
https://doi.org/10.1051/matecconf/202235704002
FEM Simulation of Non-proportional Multiaxial Fatigue Damage
Milan Sága, Milan Vaško, Zuzanka Ságová, et al.MATEC Web of Conferences 357 02006 (2022)
https://doi.org/10.1051/matecconf/202235702006
Simulation of Kinematic and Strength Analysis of a Conical Shredder
Jakub Lewandowski, Daniel Łączny, Patrycja Bałdowska-Witos, et al.MATEC Web of Conferences 357 02021 (2022)
https://doi.org/10.1051/matecconf/202235702021
Development trends in belt transmissions with V-belt
Piotr Krawiec, Łukasz Warguła, Grzegorz Domek, et al.MATEC Web of Conferences 357 01003 (2022)
https://doi.org/10.1051/matecconf/202235701003
The Development of Efficient Contaminated Polymer Materials Shredding in Recycling Processes
Józef Flizikowski, Weronika Kruszelnicka and Marek MackoPolymers 13 (5) 713 (2021)
https://doi.org/10.3390/polym13050713
Selection of parameters during shredding of corn stalks as an additive to the polymer
M Macko, D Łączny and J LewandowskiIOP Conference Series: Materials Science and Engineering 1199 (1) 012061 (2021)
https://doi.org/10.1088/1757-899X/1199/1/012061
Reasons for the Formation of Non-Fibrous Inclusions When Preparing Basalt Fibers by the Duplex Method
Anri Elbakian, Milan Sága, Boris Sentyakov, Ivan Kuric and Peter KopasMaterials 13 (21) 5033 (2020)
https://doi.org/10.3390/ma13215033
Fuel Consumption Test Results for a Self-Adaptive, Maintenance-Free Wood Chipper Drive Control System
Łukasz Warguła, Piotr Krawiec, Konrad Jan Waluś and Mateusz KuklaApplied Sciences 10 (8) 2727 (2020)
https://doi.org/10.3390/app10082727
Impact Toughness of FRTP Composites Produced by 3D Printing
Milan Vaško, Milan Sága, Jaroslav Majko, Alan Vaško and Marián HandrikMaterials 13 (24) 5654 (2020)
https://doi.org/10.3390/ma13245654
Symmetric Nature of Stress Distribution in the Elastic-Plastic Range of Pinus L. Pine Wood Samples Determined Experimentally and Using the Finite Element Method (FEM)
Łukasz Warguła, Dominik Wojtkowiak, Mateusz Kukla and Krzysztof TalaśkaSymmetry 13 (1) 39 (2020)
https://doi.org/10.3390/sym13010039
Proceedings of the 14th International Scientific Conference: Computer Aided Engineering
Marek Macko and Adam MrozińskiLecture Notes in Mechanical Engineering, Proceedings of the 14th International Scientific Conference: Computer Aided Engineering 454 (2019)
https://doi.org/10.1007/978-3-030-04975-1_53
2077 020038 (2019)
https://doi.org/10.1063/1.5091899
The problems of measuring the temperature of the small engines (SI) on the example of a drive for non-road mobile machines
Łukasz Wargula, Konrad Jan Waluś, Piotr Krawiec, et al.MATEC Web of Conferences 254 04004 (2019)
https://doi.org/10.1051/matecconf/201925404004