Open Access
| Issue |
MATEC Web Conf.
Volume 414, 2025
9th Scientific and Technical Days in Mechanics and Materials: Innovative Materials and Processes for Industrial and Biomedical Applications (JSTMM 2024)
|
|
|---|---|---|
| Article Number | 02002 | |
| Number of page(s) | 9 | |
| Section | Surface Engineering, Tribology & Corrosion | |
| DOI | https://doi.org/10.1051/matecconf/202541402002 | |
| Published online | 02 October 2025 | |
- Yahyaoui, Houda, Ben Moussa, Naoufel, Habibi, Mohamed, et al. Improvement of corrosion resistance of additive manufactured AISI 316L stainless steel in a physiological environment by TiN surface coating. The International journal of advanced manufacturing technology, vol. 125, 5, p. 2379–2391.(2023). [Google Scholar]
- Yadollahi, Aref and Shamsaei, Nima Additive manufacturing of fatigue resistant materials: Challenges and opportunities. International Journal of Fatigue, vol. 98, p. 1431.(2017). [Google Scholar]
- Yahyaoui, Houda, Sahraoui, Mannena and Habibi, Mohamed Corrosion behavior of selective laser melted biomaterials in a physiological environment. Matériaux & Techniques, vol. 112, 2, p. 201.(2024). [Google Scholar]
- Yahyaoui, Houda, Sahraoui, Mannena, Moussa, Naoufel Ben, et al. Corrosion behavior of the AISI 316L obtained by selective laser melting in simulated inflammatory conditions. Springer, City, (2023). [Google Scholar]
- Löber, Lukas, Flache, Christoph, Petters, Romy, et al. Comparison of different post processing technologies for SLM generated 316l steel parts. Rapid Prototyping Journal, vol. 19, 3, p. 173–179.(2013). [Google Scholar]
- Townsend, Andrew, Senin, Nicola, Blunt, Liam, et al. Surface texture metrology for metal additive manufacturing: a review. Precision Engineering, vol. 46, p. 34–47.(2016). [Google Scholar]
- Bourell, David, Kruth, Jean Pierre, Leu, Ming, et al. Materials for additive manufacturing. Cirp Annals, vol. 66, 2, p. 659–681.(2017). [Google Scholar]
- Wang, Chunjin, Loh, Yee Man, Cheung, Chi Fai, et al. Post processing of additively manufactured 316L stainless steel by multi-jet polishing method. journal of materials research technology, vol. 23, p. 530–550.(2023). [Google Scholar]
- Tyagi, Pawan, Goulet, Tobias, Riso, Christopher, et al. Reducing surface roughness by chemical polishing of additively manufactured 3D printed 316 stainless steel components. The International Journal of Advanced Manufacturing Technology, vol. 100, p. 28952900.(2019). [Google Scholar]
- Portella, Quentin, Chemkhi, Mahdi and Retraint, Delphine Influence of Surface Mechanical Attrition Treatment (SMAT) post-treatment on microstructural, mechanical and tensile behaviour of additive manufactured AISI 316L. Materials Characterization, vol. 167, p. 110463.(2020). [Google Scholar]
- Wang, Di, Liu, Yang, Yang, Yongqiang, et al. Theoretical and experimental study on surface roughness of 316L stainless steel metal parts obtained through selective laser melting. Rapid Prototyping Journal, vol. 22, 4, p. 706–716.(2016). [Google Scholar]
- Kaynak, Yusuf and Kitay, Ozhan The effect of post-processing operations on surface characteristics of 316L stainless steel produced by selective laser melting. Additive Manufacturing, vol. 26, p. 84–93.(2019). [Google Scholar]
- Sahraoui, Mannena, Yahyaoui, Houda, Moussa, Naoufel Ben, et al. Effect of sterilization on the corrosion behavior of orthopedic implants coated and uncoated. Matériaux & Techniques, vol. 112, 2, p. 203.(2024). [Google Scholar]
- Santa-Aho, Suvi, Kiviluoma, Mika, Jokiaho, Tuomas, et al. Additive manufactured 316l stainless-steel samples: Microstructure, residual stress and corrosion characteristics after post-processing. Metals, vol. 11, 2, p. 182.(2021). [Google Scholar]
- Makhlouf, Kamel, Sidhom, Naziha, Khlifi, Ammar, et al. Low cycle fatigue life improvement of AISI 304 by initial and intermittent wire brush hammering. Materials Design, vol. 52, p. 1088–1098.(2013). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.