Impact of crystallographic structures on the corrosion resistance of AISI 304L processed by machining and cryogenic deep rolling

Open Access

Issue		MATEC Web Conf. Volume 414, 2025 9^th Scientific and Technical Days in Mechanics and Materials: Innovative Materials and Processes for Industrial and Biomedical Applications (JSTMM 2024)


Article Number		02001
Number of page(s)		11
Section		Surface Engineering, Tribology & Corrosion
DOI		https://doi.org/10.1051/matecconf/202541402001
Published online		02 October 2025

N. Ben Moussa, H. Sidhom, C. Braham, Numerical and experimental analysis of residual stress and plastic strain distributions in machined stainless steel. Int. J. Mech. Sci., 64(1), 82–93 (2012). https://doi.org/10.1016/j.ijmecsci.2012.07.011 [Google Scholar]
D. Panov, E. Kudryavtsev, R. Chernichenko, A. Smirnov, N. Stepanov, Y. Simonov, S. Zherebtsov, G. Salishchev, Mechanisms of the Reverse Martensite-to-Austenite Transformation in a Metastable Austenitic Stainless Steel. Metals, 11, 599 (2021). https://doi.org/11, 599. 10.3390/met11040599 [Google Scholar]
A.Y. Chaudhari, D.D. Deshmukh, Metallurgical investigations on corrosion behavior of simple and heat treated duplex stainless steel 2205 exposed to corrosive media. IOP Conf. Ser.: Mater. Sci. Eng., 810(1), 012048 (2020). https://doi.org/10.1088/1757-899X/810/1/012048 [Google Scholar]
K. Gharbi, N. Ben Moussa, N.B. Fredj. (2021). Corrosion resistance enhancement of AISI 304 stainless steel by deep rolling treatment. In: Kharrat, M., Baccar, M., Dammak, F. (Eds.), Advances in Mechanical Engineering, Materials and Mechanics. ICAMEM 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-52071-7_32 [Google Scholar]
K. Gharbi, N. Ben Moussa, A. Ben Rhouma, N. Ben Fredj, Passive film characterization of cryogenically deep-rolled AISI 304L for improved corrosion resistance in NaCl solution. J. of Materi Eng and Perform (2025). https://doi.org/10.1007/s11665-02511171-z [Google Scholar]
H.-s. Lee, D.-s. Kim, J.-s. Jung, Y.-s. Pyoun, K. Shin, Influence of peening on the corrosion properties of AISI 304 stainless steel. Corros. Sci., 51(12), 2826–2830 (2009). https://doi.org/10.1016/j.corsci.2009.08.008 [Google Scholar]
K. Gharbi, N. Ben Moussa, A. Ben Rhouma, N. Ben Fredj, Improvement of the corrosion behavior of AISI 304L stainless steel by deep rolling treatment under cryogenic cooling. Int. J. Adv. Manuf. Technol. 117(11-12), 3841–3857 (2021). https://doi.org/10.1007/s00170-021-07744-6 [Google Scholar]
A. Jafari Tadi, Formation of surface nano/ultrafine structure using deep rolling process on the AISI 316L Stainless Steel. Mater. Sci. & Eng. Int. J. 1(3), (2017). https://doi.org/10.15406/mseij.2017.01.00015 [Google Scholar]
V. Kain, Stress corrosion cracking (SCC) in stainless steels, (Stress Corrosion Cracking, V.S. Raja and T. Shoji, Woodhead Publishing, 2011). [Google Scholar]
I. Bott, L. Souza, L. Olaya-Luengas, E. Valencia Morales, Austenite transformation in duplex stainless steels under fast cooling rates, in Contributed Papers from Materials Science and Technology 2019 (MS&T19), Oregon Convention Center, Portland, Oregon, USA, September 29–October 3 (2019), 1010–1017. [Google Scholar]
G. Krauss, Steels: heat treatment and processing principles, (ASM International, 1990). [Google Scholar]
R. Kapoor, I. Batra, On the α′ to γ transformation in maraging (grade 350), PH 13-8 Mo and 17-4 PH steels. Mater. Sci. Eng. A. 371(1-2), 324–334 (2004). https://doi.org/10.1016/j.msea.2003.12.023 [Google Scholar]
Y.I. Son, Y.-K. Lee, K.-T. Park, Reverse transformation of ferrite and pearlite to austenite in an ultrafine-grained low-carbon steel fabricated by severe plastic deformation. Metallurgical and Materials Transactions A, 37(10), 3161–3164 (2006). https://doi.org/10.1007/s11661-006-0196-6 [Google Scholar]
K. Gharbi, N.B. Moussa, N. Ben Fredj, Deep rolled surface improvement of the AISI 304L using cryogenic cooling, in Advances in Mechanical Engineering and Mechanics II, CoTuMe 2021, Hammamet, Tunisia, March 22-24 (2021). https://doi.org/10.1007/978-3-030-86446-0_32 [Google Scholar]
A.A. Tiamiyu, U. Eduok, J. A. Szpunar, A. G. Odeshi, Corrosion behavior of metastable AISI 321 austenitic stainless steel: Investigating the effect of grain size and prior plastic deformation on its degradation pattern in saline media. Sci. Rep. 9(1), 12116 (2019). https://doi.org/10.1038/s41598-019-48594-3 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.