EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 412 (2025) MATEC Web Conf., 412 (2025) 03004 References
Open Access
Issue
MATEC Web Conf.
Volume 412, 2025
42nd. Annual Conference “Meeting of the Departments of Fluid Mechanics and Thermomechanics” in the connection with XXIV. International Scientific Conference “The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy” (42nd. MDFMT & XXIV. AENMMTE-2025)
Article Number 03004
Number of page(s) 12
Section Special Experimental Methods in Fluid Mechanics and Energy
DOI https://doi.org/10.1051/matecconf/202541203004
Published online 05 September 2025
  1. R. Weber, A.K. Gupta, S. Mochida, Applied Energy, 278 (2020) article number 115551 [Google Scholar]
  2. T. Hasegawa, R. Tanaka, T. Niioka, The 1st Asia-Pacific Conference on Combustion, May 12-15, 1997, Osaka, Japan, pp. 290-293 [Google Scholar]
  3. K. Kishimoto, Y. Watanabe, M. Kasahara, T. Hasegawa and R. Tanaka, The 1st Asia- Pacific conference on Combustion, Osaka, Japan, May 12-15, 1997, pp. 468-471 [Google Scholar]
  4. K. Amagai and M. Arai, RAN95, Int. Symposium on Advanced Energy Conversion Systems and Related Technologies, 4- 6 December, 1995, Nagoya, pp. 703-710 [Google Scholar]
  5. K. Kitagawa, N. Konishi, N. Arai and A.K. Gupta, FACT-Vol.22, Int. Joint Power Generation Conference, Vol. 1, ASME 1998, p. 239-242 [Google Scholar]
  6. T. Isiguro, S. Tsuge, T. Furuhata, K. Kitagawa, N. Aral, T. Hasegawa, R. Tanaka and A.K. Gupta, Proceedings of the Combustion Institute, vol.27, 1998, pp. 3205-3213 [Google Scholar]
  7. T. Plessing, N. Peters and J.G. Wunning, Proc. of the Combustion Institute, vol.27, 1998, pp.3197-3204 [Google Scholar]
  8. A.K. Gupta, Z. Li, IJPGC 1997, ASME EC-vol 5, Volume 1 [Google Scholar]
  9. P. Durcansky, S. Papucik, J. Jandacka, M. Holubcik, R.Nosek, Design of heat exchanger for Ericsson-Brayton piston engine, Scientific world journal, Article Number 138254, 2014 [Google Scholar]
  10. M. Holubčík, N. Čajová Kantová, J. Jandačka, A. Čaja, The performance and emission parameters based on the redistribution of the amount of combustion air of the wood stove. Processes 2022, 10, 1570 [Google Scholar]
  11. S. Bolz and A.K. Gupta, FACT-Vol.22, Int. Joint Power Generation Conference, Vol. 1, ASME 1998, pp. 193-205 [Google Scholar]
  12. A.K. Gupta, S. Bolz and T. Hasegawa, Journal of Energy Resources Technology, 121 (1999) 209-216 [Google Scholar]
  13. S. Mochida and T. Hasegawa, Proceedings of the 2 nd International Seminar on High Temperature Combustion in Industrial Furnaces. January 17-18, 2000. Jernkontoret- KTH, Stockholm, Sweden [Google Scholar]
  14. S. Lille, T. Dobski and W. Blasiak, AIAA Journal of Propulsion and Power, 16(4) (2000) 595-600 [Google Scholar]
  15. S. Lille, W. Blasiak and M. Jewartowski, Energy, 30(2-4) (2005) 373-384 [Google Scholar]
  16. T. Fujimori, D. Riechelmann and J. Sato, 1st ASPAC, Osaka, Japan, May 1997 [Google Scholar]
  17. J. Sato, 1stASPAC, Osaka, Japan, May 1997 [Google Scholar]
  18. W. Dong and W. Blasiak, Archive of Combustion. 20, 2000 [Google Scholar]
  19. R. Rota, F. Guarneri, D. Gelosa, A. Effuggi and M. Rabaioli, 4th HTACG symposium, Rome, November, 2001 [Google Scholar]
  20. S. Mochida, T. Hasegawa and R. Tanaka, RAN95, Int. Symposium on Advance Energy Conversion Systems and Related Technologies, Nagoya, Japan, 4-6 December, 1995 [Google Scholar]
  21. J. Yuan, Y. Kobayashi and I. Naruse, 2nd International High Temperature Combustion Symposium, Kaohsiung, Taiwan, January 20-22, 1999 [Google Scholar]
  22. V. Józsa, Mixture temperature-controlled: A revolutionary concept for ultra-low NOx emission. Fuel 291 (2021) [Google Scholar]
  23. W. Yang, W. Blasiak, 3rd Int. Symposium on Advanced Energy Conversion Systems and Related Technologies, Dec.15-17, 2001, Nagoya, Japan [Google Scholar]
  24. H. Tsuji, A. Gupta, T. Hasegawa, M. Katsuki, K. Kishimoto, M. Morita, Energy Conservation to Pollution Reduction, ISBN 0-8493-1036-9, CRC Press LLC, New York, 2003 [Google Scholar]
  25. M. Mortberg, A.K. Gupta, W. Blasiak, Joint Conference on Sustainable Energy and environment (SSE), December 1-3, 2004, Hua-Hin, Thailand [Google Scholar]
  26. N. Rafidi, W. Blasiak, M. Jewartowski, D. Szewczyk, IFRF Electronic Combustion Journal, June 2005, article number 20050 [Google Scholar]
  27. Y. Tian, X. Zhou, X. Ji, J. Bai, L. Yuan, Energy, 171 (2019) 149-160 [Google Scholar]
  28. R. Roy, A.K. Gupta, Fuel, 262 (2020), article number 116460 [Google Scholar]
  29. S. Karyeyen, J.S. Feser, E. Jahoda, A.K. Gupta, Development of distributed combustion index from a swirl assisted burner, Applied Energy, 268 (2020), article number 114967 [Google Scholar]
  30. N. Čajová Kantová, M. Holubčík, A. Čaja, J. Trnka, J. Jandačka, Analyses of pellets produced from spruce sawdust, spruce bark, and pine cones in different proportions, Energies 2022, 15, 2725 [Google Scholar]
  31. N. Čajová Kantová, M. Holubčík, J. Trnka, A. Čaja, Analysis of ash melting temperatures of agricultural pellets detected during different conditions. Fire 2023, 6, 88 [Google Scholar]
  32. A.E. Khalil and A.K. Gupta, Fuel, 195 (2017) 113–122 [Google Scholar]
  33. A.E.E. Khalil and A.K. Gupta, Fuel, 171 (2016) 116–124 [Google Scholar]
  34. N. Schaffel-Mancini, M. Mancini, A. Szlek, R. Weber, Energy, 35 (2010), article number 2752-2760 [Google Scholar]
  35. F. Xing, A. Kumar, Y. Huang, S. Chan, C. Ruan, S. Gu and X. Fan, Applied Energy, 193 (2017), 28-51 [Google Scholar]
  36. J. Stasiek, M. Jewartowski and A. Stasiek, Termografia Ciekłokrystaliczna i Anemometria Obrazowa w Wybranych Zastosowaniach Technicznych. AGNI Publishing .Pruszcz Gdanski. Poland 2016 (in Polish) [Google Scholar]
  37. A.A.V. Perpignan, A.G. Rao and Roekaerts D.J.E.M., Progress in Energy and Combustion Science 69 (2018) [Google Scholar]
  38. J. Stasiek, M. Jewartowski and W. Yang, E3S Web of Conferences, 13 (2017) article number 03005 [Google Scholar]
  39. J. Stasiek and M. Szkodo, Energies, 13 (2020) article number 4218 [Google Scholar]
  40. M. Jewartowski, “Modelowanie spalania w pojedynczym płomieniu przy wysokotemperaturowym podgrzewie utleniacza”, in Polish, Doctoral Thesis, (2009) [Google Scholar]
  41. ANSYS Fluent CFD Release 19.2, User’s Guide [Google Scholar]
  42. M.G. Carvalho, T. Farias, P. Fontes, Predicting radiative heat transfer on absorbing, emitting and scattering media using the descrete trasnfer method, ASME HTD, Vol. 160, 1991 [Google Scholar]
  43. J.G. Wünning, “Flameless Combustion and Its Applications”. IGT05, Orlando, Floryda, USA, 2005 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.