EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 412 (2025) MATEC Web Conf., 412 (2025) 01002 References
Open Access
Issue
MATEC Web Conf.
Volume 412, 2025
42nd. Annual Conference “Meeting of the Departments of Fluid Mechanics and Thermomechanics” in the connection with XXIV. International Scientific Conference “The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy” (42nd. MDFMT & XXIV. AENMMTE-2025)
Article Number 01002
Number of page(s) 15
Section Measurement and Calculation of State Variables in the Fluid Flow
DOI https://doi.org/10.1051/matecconf/202541201002
Published online 05 September 2025
  1. J. Miettinen, S. Louhenkilpi and J. Laine, Solidification analysis package IDS. In Proceeding of General COST 512 Workshop on Modelling in Materials Science and Processing, M.Rappaz and M. Kedro eds., ECSC-EC-EAEC, Brussels (1996) [Google Scholar]
  2. F. Kavicka, J. Dobrovska, J. Stetina, J. Katolicky, J. Heger, Numerical Models of Solidification and their Application in Metal and Ceramic Technology. Litera Brno (2016) [Google Scholar]
  3. J. Heger, Solution of the inverse heat transfer problem in the mold wall at concasting. In Proceedings and CD ROM of the National conference with international participation ENGINEERING MECHANICS, Svratka, Czech Republic, 30-34, May (2001) [Google Scholar]
  4. J. Stetina, F. Kavicka, J. Katolicky, T. Mauder, L. Klimeš, Začlenění dynamického modelu BrDSM teplotního pole plynule odlévané bramy do řídicího systému ve VÍTKOVICE STEEL. Hutnické listy, LXX, 1, 15-20 (2017) [Google Scholar]
  5. J. Heger, et al., Numerical optimization of the method of cooling of a massive casting of ductile cast-iron. Materiali in tehnologie/Materials and technology, 43, 2, 73–78 (2009) [Google Scholar]
  6. J. Molínek, et al., Optimization of technological parameters of the gravity-cast rolls for rolling. Final research report of the project GAČR GA106/04/1334, Ostrava, Czech Republic (2007) [Google Scholar]
  7. J. Dobrovska, et al., Temperature Field and Solidification Structure of a Ductile- Cast-Iron Roller. Key Engineering Materials, 592, 1, 197–200 (2014) [Google Scholar]
  8. J. Dobrovska, et al., The Character of the Solidification Structure of Massive Ductile Cast-Iron Castings and its Prediction. In Proceeding of 23rd International Symposium on Transport Phenomena (ISTP 23), Auckland, New Zealand, 50-55 (2012) [Google Scholar]
  9. J. Heger, et al., Numerical optimization of the method of cooling of a massive casting of ductile cast-iron. In Proceedings of 22nd Canadian Congress of Applied Mechanics, Dalhousie University Halifax, Nova Scotia, Canada, p. 21-24, May (2009) [Google Scholar]
  10. K. Stransky, et al., The character of the solidification structure of massive ductile cast-iron Casting and its prediction. Materials Science Forum, 567-568, 109–112 (2007), ©2008 Trans Tech Publications, Switzerland. [Google Scholar]
  11. F. Kavicka, et al., Castings from corundo-baddeleyit ceramics – their properties and utilization for wear resistant materials, piping, etc. Slévárenství, 49, 9, 524–529 (2001) [Google Scholar]
  12. F. Kavicka, J. Stetina, J. Katolicky, T. Mauder, L. Klimes, A simulation similarity of the process of solidification of steel castings and castings from EUCOR. In Proceedings of 54th Foundry days, Czech foundry company, Brno, September, 15- 25 (2017) [Google Scholar]
  13. J. Heger, et al., The experimental and numerical investigation of the solidification of a porous ceramic casting. Frontiers in Heat and Mass Transfer (FHMT), 3, 3, 1–9 (2012). [Google Scholar]
  14. J. Molínek, et al., Problems of temperature measurement at corundum-baddeleyit ceramics casting. Acta Metallurgica Slovaca, 5, 2/3 (2001) [Google Scholar]
  15. J. K. Brimacombe, The Challenge of Quality in Continuous Casting Process. Metallurgical and Materials Trans. B, 30B (1999), 553–566 [Google Scholar]
  16. B. G. Thomas, R. J. O’Malley, D.T. Stone, Measurement of temperature, solidification, and microstructure in a continuous cast thin slab. Paper presented at Modeling of Casting, Welding and Advanced Solidification Processes VIII, San Diego, CA, TMS. 1998. [Google Scholar]
  17. J. Stetina J., et al., The numerical and Experimental investigation of a concasting process, The Book of Abstracts of the ASME/JSME Thermal Engineering Joint Conference, Kohala Coast, Hawaii USA, March 2003, p. 103. [Google Scholar]
  18. R. A. Richard, R. Harding, Kai Liu, Ch. Beckermann, A transient simulation and dynamic spray cooling control model for continuous steel casting, Metallurgical and Materials Ttransactions, 34B (2003), 297–306. [Google Scholar]
  19. J. Stetina, F. Kavicka, J. Dobrovska, Mathematical model for the calculation of the temperature field of a billet in real time. In Book of Abstracts and CD ROM of the 13th International Heat Transfer Conference, Sydney, Australia, August 13- 18, 2006, p. 26. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.