| Issue |
MATEC Web Conf.
Volume 369, 2022
40th Annual Conference - Meeting of the Departments of Fluid Mechanics and Thermomechanics in the connection with XXIII. International Scientific Conference - The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy (40th. MDFMT & XXIII. AEaNMiFMaE-2022)
|
|
|---|---|---|
| Article Number | 04001 | |
| Number of page(s) | 6 | |
| Section | Current Problems in the Energy | |
| DOI | https://doi.org/10.1051/matecconf/202236904001 | |
| Published online | 04 November 2022 | |
Analysis of the Influence of Boundary Condition on Simulation Accuracy of Solidification Thermokinetics Model
Brno University of Technology, Faculty of Mechanical Engineering, Czech Republic
* Corresponding author: kavicka@fme.vutbr.cz
For a sample steel casting of a cylindrical shape that was cast in a metallic cylindrical mould, the analysis of influence and importance of the main boundary condition on the simulation accuracy of the temperature field in the system of casting-mould-environment was performed. For this system, the influence of the boundary condition on the frame of the mould, on the bottom of the mould, on the top of the casting, and on the casting-mould interface was analysed. As a comparing quantity for accuracy, the time-dependent temperature field (by means of isotherms) of the casting and of the mould and the total solidification time were selected. When the simulation considers the boundary conditions of one of these boundaries of the system, the heat transfer coefficient on the remaining three boundaries of the system is equal zero. The resultant heat flow along the axis is zero always. The conclusions can be used for fine-tuning of solidification models as well as for other applications; e.g. analysis and solution of inverse heat transfer problems.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.