EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 409 (2025) MATEC Web Conf., 409 (2025) 11003 References
Open Access
Issue
MATEC Web Conf.
Volume 409, 2025
Concrete Solutions 2025 – 9th International Conference on Concrete Repair, Durability & Technology
Article Number 11003
Number of page(s) 8
Section Repair & Strengthening Materials and Techniques 2
DOI https://doi.org/10.1051/matecconf/202540911003
Published online 13 June 2025
  1. Y. Schwarz, D. Sanio, P. Mark, Thermal prestressing of supplemental reinforcement – experimental implementation on unloaded beams. Beton und Stahlbetonbau (2025). https://doi.org/10.1002/best.202400097 [Google Scholar]
  2. Y.H. Park, C. Park, Y.G. Park, The behavior of an in-service plate girder bridge strengthened with external prestressing tendons. Eng. Struct. 27(3), 379 (2005). https://doi.org/10.1016/j.engstruct.2004.10.01 4 [CrossRef] [Google Scholar]
  3. V. Palieraki, E. Oikonomopoulou, G. Genesio, E. Vintzileou, Experimental cyclic behavior of concrete interfaces with postinstalled reinforcing bars or alternative connectors. Struct. Concr. 24(4), 5265 (2023). https://doi.org/10.1002/suco.202201034 [CrossRef] [Google Scholar]
  4. F. Iavarone, F.J. Vecchio, G. Plizzari, F. Minelli, Shear bond between existing concrete and high‐strength fiber reinforced overlay: Influence of substrate strength and interface roughness. Struct. Concr. 25(1), 526 (2024). https://doi.org/10.1002/suco.202200465 [CrossRef] [Google Scholar]
  5. H. Weiher, UHPC-beam as structural product for shear strengthening of bridges (CoBeam), in Proceedings of 6th fib international congress, Oslo, Norway, June 12-16 (2022) [Google Scholar]
  6. J. Feix, J. Lechner, Concrete screws as post installed reinforcement, in Book of abstracts of the 3rd International Symposium on Connections between Steel and Concrete, Stuttgart, Germany, September 27-29 (2017). [Google Scholar]
  7. J. Lechner, J. Feix, First experiences with concrete screw anchors as postinstalled shear reinforcement in concrete bridges. Civil Engineering Design, 1(1), 17 (2019). https://doi.org/10.1002/cend.201800004 [CrossRef] [Google Scholar]
  8. ETA-20/0541: Injection system Hilti HIT-RE 500 V4, (2023). [Google Scholar]
  9. J.I. Croppi, M.A. Ahrens, A. Palmeri, R. Piccinin, P. Mark, Experimental investigation on post-installed lap splices in ordinary and steel fiber-reinforced concrete. Mater. Struct. 57(8) (2024). https://doi.org/10.1617/s11527- 024-02450-7 [CrossRef] [Google Scholar]
  10. J.I. Croppi, M.A. Ahrens, G. Genesio, R. Piccinin, D. Casucci, P. Mark, Bond stresses in post‐installed reinforcing bars derived via fiber optic sensors. Struct. Concr. 25(3), 1884 (2024). https://doi.org/10.1002/suco.202300877 [CrossRef] [Google Scholar]
  11. D.C. Montgomery, G.C. Runger, Applied statistics and probability for engineers (Wiley, Hoboken NJ, 2018). [Google Scholar]
  12. Deutscher Ausschuss für Stahlbeton. Heft 617 - ACI-DAfStb databases 2015 with shear tests for evaluating relationships for the shear design of structural concrete members without and with stirrups (Beuth, Berlin, 2017). [Google Scholar]
  13. F. Clauß, M.A. Ahrens, P. Mark, A comparative evaluation of strain measurement techniques in reinforced concrete structures–A discussion of assembly, application, and accuracy. Struct. Concr. 22(5), 2992 (2021). https://doi.org/10.1002/suco.202000706 [CrossRef] [Google Scholar]
  14. F. Monney, M. Fernández Ruiz, A. Muttoni, Influence of amount of shear reinforcement and its post‐yield response on the shear resistance of reinforced concrete members. Struct. Concr. 24(1), 1002 (2023). https://doi.org/10.1002/suco.202200331 [CrossRef] [Google Scholar]
  15. DIN EN ISO 15630-1. Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, rods and wire (Beuth, Berlin, 2019) [Google Scholar]
  16. Monserrat López, M. Fernánez Ruiz, P.F. Miguel Sosa, The influence of transverse reinforcement and yielding of flexural reinforcement on the shear-transfer actions of RC members. Eng. Struct. 234, 111949 (2021). https://doi.org/10.1016/j.engstruct.2021.11194 9 [CrossRef] [Google Scholar]
  17. J. Feix, J. Lechner, M. Spiegl, R. Walkner, Nachhaltige Bauwerksverstärkung mit Betonschrauben. BetonKalender 953–1005 (2021). https://doi.org/10.1002/9783433610206.ch11 [Google Scholar]
  18. CEN. DIN EN 1992-1-1: Eurocode 2: Design of Concrete Structures - Part 1-1: General rules and rules for buildings (Beuth, Berlin, 2011) [Google Scholar]
  19. CEN. DIN EN 1992-1-1/NA: National Annex – Nationally determined parameters – Eurocode 2: Design of Concrete Structures - Part 1-1: General rules and rules for buildings (Beuth, Berlin, 2013) [Google Scholar]
  20. Thesis, Department of Civil Engineering, University of Ibadan, Ibadan (2022) [Google Scholar]
  21. Paratibha, S. Rafat, A. Yogesh, M.G. Surinder. Self compacting concrete-Procedure for Mix Design. Leonardo Electronic Journal of Practices and Technologies. Issue 12, p 15- 24 (2008) (ISSN:1583-1078) [Google Scholar]
  22. K.C. Panda, P.K. Bal. Properties of Self- compacting concrete using Recycled coarse aggregate. International Conference on Chemical, Civil and mechanical engineering (NUICONE2012) (2013) https://www.sciencedirect.com/Doi:10. 1016/j.proeng.2013.01.023 [Google Scholar]
  23. J. Prasad, D.K. Jain, A.K. Ahuja. Factors Influencing the Sulphate resistance of Cement Concrete and Mortar. Asian Journal of Civil Engineering (Building and Housing) 7(3), 259-268 (2006) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.