Open Access
| Issue |
MATEC Web Conf.
Volume 409, 2025
Concrete Solutions 2025 – 9th International Conference on Concrete Repair, Durability & Technology
|
|
|---|---|---|
| Article Number | 09001 | |
| Number of page(s) | 7 | |
| Section | Repair & Strengthening Materials and Techniques 1 | |
| DOI | https://doi.org/10.1051/matecconf/202540909001 | |
| Published online | 13 June 2025 | |
- D. Breysse, Introduction à la problématique des risques en Génie Civil, [online], Available: http://www.unit.eu/cours/cyberrisques/rdc/res/Poly copierdc.pdf (2009) [Google Scholar]
- M. Lechani, S. kenai, N. E. Hannachi, Diagnostic des causes de dégradation des ouvrages en béton armé, [online], Available: http://www.entp.edu.dz/revue/files/article/15/articl e%207.pdf [Google Scholar]
- F. Benboudjema, A. Darquennes, “Fissuration par retrait gêné dans les ouvrages en béton armé”, Techniques de l’Ingénieur (2015). [Google Scholar]
- M. Roig-Flores, S. Moscato, P. Serna, L. Ferrara, “Self-healing capability of concrete with crystalline admixtures in different environments”, Construction and Building Materials, 6 (2015). [Google Scholar]
- K. Olivier, A. Darquennes, F. Benboudjema, R. Gagné, “Early-age self-healing of cementitious materials with ground granulated blast-furnace slag under water curing”, Journal of Advanced Concrete Technology, 14 (2016) [Google Scholar]
- T. Qureshi, A. Al-Tabbaa, “The effect of magnesia on the self-healing performance of portland cement with increased curing time”, 1st International Conference on Ageing of Materials & Structures (2014) [Google Scholar]
- T. Qureshi, A. Kanellopoulos, A. Al-Tabbaa, “Autogenous self-healing of cement with expansive minerals: Impact in early age crack healing”, Construction and Building Materials, 192 (2018) [Google Scholar]
- P. Zhang, Y. Dai, W. Wang, J. Yang, L. Mo, W. Guo, J. Bao, “Effects of magnesia expansive agents on the self-healing performance of microcracks in strain-hardening cement-based composites”, Materials Today Communications, 25, (2020). [Google Scholar]
- M. A. Sherir, K. M. Hossain, M. Lachemi, “The influence of MgO-type expansive agent incorporated in self-healing system of engineered cementitious composites”, Construction and Building Materials, 149 (2017) [Google Scholar]
- NF EN 1504-3, Produits et systèmes pour la protection et la réparation des structures en béton - Définitions, exigences, maîtrise de la qualité et évaluation de la conformité - Partie 3 : réparation structurale et réparation non structurale (2006) [Google Scholar]
- NF EN 206+A2/CN, Béton - Spécification, performance, production et conformité - Complément national à la norme NF EN 206+A2 (2022) [Google Scholar]
- EN 196-1, Méthodes d’essais des ciments. Détermination des résistances mécaniques (1990) [Google Scholar]
- NF EN 1542, Produits et systèmes pour la protection et la réparation des structures en béton - Méthodes d’essais - Mesurage de l’adhérence par traction directe (1999) [Google Scholar]
- NF EN 13036-1, Caractéristiques de surface des routes et aérodromes - Méthodes d’essai - Partie 1: mesurage de la profondeur de macrotexture de la surface d’un revêtement à l’aide d’une technique volumétrique à la tâche (2010) [Google Scholar]
- N. J. Bélair, Contribution à la mise au point d’une procédure de caractérisation quantitative des surfaces en béton en vue de travaux de réfection, Master Thesis, Laval University, Canada (2005) [Google Scholar]
- L. Ammar, Self-healing capacity of cementitious materials: Enhancement with expansive agents and mineral additions, PhD Thesis, INSA Rennes, France (2022) [Google Scholar]
- A. Darquennes, K. Olivier, F. Benboudjema, R. Gagné, “Self-healing at early-age, a way to improve the chloride resistance of blast-furnace slag cementitious materials”, Construction and Building Materials, 113 (2016) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.